Liquitex - Mediums & Varnishes

Filter

Reset

Availability

In Stock (133)
Out of Stock (4)

Price

$0 - $10
$10 - $20
$20 - $50
$50 - $100
$100+

Brand

Liquitex (137)

Reset

137 results

Filter

View:

Reset

Set of 3 Pouring Medium - 118ml

Liquitex

$39.99

In stock Low stock Unavailable

Pouring medium offers a smooth, stable and non-crazing finish—the ultimate in flowing fluidity! Thanks to the Liquitex Pouring Medium Trial Set, you can experiment with three different effects. Get creative!

Contains 3 x 118 ml:

Matte Pouring Medium
Iridescent Pouring Medium
Gloss Pouring Medium

Matte Varnish - 237ml

Liquitex

$26.99

In stock Low stock Unavailable

This 100% acrylic polymer varnish protects acrylic colour from harsh elements. Dries to a clear, non-tacky, hard, flexible surface that is resistant dirt retention and water when dry. Of fluid viscosity, Liquitex varnish becomes transparent upon drying, stays smooth and does not yellow.

100% acrylic polymer varnish
Water soluble when wet
Good chemical and water resistance when dry
Non-tacky
Hard, yet flexible surface
Resistant to dirt retention
Resists discolouring due to humidity, heat and ultraviolet light (non-yellowing, non-fogging)
Depending upon substrate, allows moisture to pass through (breathable)
Not for use over oil paint
Protects acrylic colour
Archival
For interior and exterior use

Application

Apply as a final varnish over dry acrylic paint.
Varnish surface and environment must be clean, dry and dust free.
Acrylic paintings must be completely dried and cured for 48-72 hours before varnishing. Thicker acrylic applications may take more time to cure.
Application may be done by brush or spray. Generally a sprayed application will be thinner, smoother and more even. Rolling or sponging application is not recommended.

Caution: Acrylic paints and mediums become increasingly brittle in cold weather. Do not apply below 60°F.

Tips & Techniques

Use a wide, soft hair brush. Generally, a 1 to 4 inch flat brush is used, depending on the surface area.
Apply Liquitex varnish in 1-3 thin coats, rather than 1 thick coat. A thick coat will take longer to dry, may dry cloudy, may drip or sag during application and has a greater chance of showing brush strokes when dry.
When applying Liquitex Matte Varnish, apply no more than 1-2 thin coats. A thick application may result in cloudiness when dry. If more than 2 coats are desired, first varnish with gloss varnish until desired thickness is achieved and then apply a final coat of matte varnish.
Canvas should be placed horizontally in order to prevent the varnish from running. After varnishing, the surface should be shielded with a protective "tent". This will prevent any dust or airborne particles from settling into varnish as it dries.
Apply Liquitex varnish in slightly overlapping pattern that covers entire artwork. Apply in horizontal and vertical brush strokes, so that entire area is evenly coated.
Do not rework areas you might miss as the brush could pick up partially dried varnish and cause clouding. If areas are missed, wait until the varnish is dry and apply another coat.

Spray Application: Use for textured surfaces (thick impasto, thick textures), where brush application may result in foaming and fragile surfaces (watercolor, tempera, graphite, pastel, gouache), where brush application may disrupt drawing or painted surface.

Thinning: Do not thin, as it will weaken the varnish film and adhesion.

Removal: Not removable. Do not attempt to remove these varnishes with harsh solvents.

Tool care: Clean with soapy water while varnish is still wet.

Satin Varnish - 946ml

Liquitex

$64.99

In stock Low stock Unavailable

Liquitex Satin Varnish dries clear to a flexible, non-tacky, hard surface that will not hold brush marks. Offering excellent levelling properties, it is permanent and protects against UV damage. Suitable for acrylic paints and mediums, as well as both flexible and rigid surfaces.

Specifications:

interior and exterior use
100% acrylic polymer varnish
adjusts and unifies surface sheen
protects and resists dirt retention
increases brightness and colour saturation
resists discolouration
semi-opaque when wet
transparent when dry

Soluvar Matte Varnish Spray - 400Ml

Liquitex

$39.99

In stock Low stock Unavailable

Protect your oil or acrylic pieces with Liquitex Soluvar Spray Varnish. It adjusts and unifies surface sheen and dries clear to a flexible, non-sticky, hard surface. It also protects colours from UV light damage and resists discolouration caused by humidity and heat. A varnish with excellent levelling properties that will not hold brushmarks. Use it on flexible or rigid surfaces, indoors or outdoors. Glossy Soluvar Spray Varnish enhances the depth and intensity of colours, while Matt Soluvar Spray Varnish reduces their intensity, depth and shine.

Flow-Aid Fluidifier - 118ml

Liquitex

$16.99

In stock Low stock Unavailable

Liquitex flow aid improves the fluidity of acrylics, water colours or gouaches. It increases the absorbent power and the mixing of paints and limits brushstroke marks.

Opaque when wet and translucent when dry. Liquitex flow aid does not oxidize.

Directions:

Liquitex flow-aid is a concentrate. Dilute with water before mixing into paint. Distilled water is best, since quality of tap water varies. (Normal dilution : 1 part Liquitex flow aid to 20 parts distilled water)

Use :

Mixed with acrylic paints : for wash painting, glaze, tint and other water colour techniques.

Important information :

Do not use undiluted.

Do not add more than 25% to the paint.

For an optimal result, use with fluid acrylic paints.

Do not mix with oil.

Gesso Clear - 473ml

Liquitex

$39.99

In stock Low stock Unavailable

Liquitex transparent gesso primes rigid supports while preserving their natural aspect. It provides a rough surface adapted to a large diversity of mediums and allows the work surface to show through.
Liquitex transparent gesso is particularly suitable for pastel or charcoal works, but also for oil, acrylic, gouache and casein. It allows for a better colour adherence and can be coloured.
Translucent once dry, it is permanent, does not crack, is non-yellowing, flexible and waterproof. This gesso is ideal for painting on coloured surfaces and constitutes an excellent background for oil and acrylic paintings.
Liquitex transparent gesso is offered in 4 oz/120 ml, 8 oz/250 ml, 16 oz/500 ml and 32 oz/1 l formats.
Drying time : at least 24 hrs before painting.
Supports : canvas, cardboard, paper, wood and other non-greasy surfaces.
Important information :
Do not mix with oil.
Is water soluble.

Gesso White - 473ml

Liquitex

$39.99

In stock Low stock Unavailable

Premium acrylic gesso used to prepare painting surfaces for acrylic and oil paint.

Texture: Fluid
Sheen: Matte
Relative Opacity: Opaque

Non-yellowing
Flexible and non-cracking
Provides the perfect 'tooth' and adhesion to a wide variety of surfaces such as canvas, paper and wood
Excellent base coat primer for many applications, such as canvases, murals, etc.
One coat is usually all that is required.

Application :
Use undiluted or thin up to 25% with water. When thinning more that 25%, use an equal mixture of water and Liquitex Matte Medium to thin gesso. Tint with up to 10% Liquitex Soft Body or Heavy Body Artist Colours.

Matte Medium - 946ml

Liquitex

$54.99

In stock Low stock Unavailable

Liquitex matte medium can be used to thin acrylic, increase its transparency and mattness, make it more fluid and soft and improve its adherence. Of medium viscosity, the medium accentuates the matte rendering of acrylic colours to which it is mixed. It can also be used as a background or a fixative. It is opaque when wet and translucent when dry. It delays drying time and is permanent, non-yellowing and resistant to water once dry. Liquitex matte medium is offered in 4 oz, 8 oz, 16 oz, 32 oz and 128 oz formats. Important information : Do not dilute by more than 25% with water. Do not use as a final varnish or as a glazing medium.

Ultra Gloss Varnish - 946ml

Liquitex

$64.99

In stock Low stock Unavailable

Liquitex high gloss varnish enhances the intensity, transparency and luminosity of colours. It protects and improves the fluidity of paint and its adherence to supports. Of medium viscosity, it becomes transparent upon drying, stays smooth and does not yellow. Important information : For interior and exterior use. The permanent varnishes are irreversible and must always be tested before being applied. The painted surface must be completely dry (between 72 hours and 2 weeks, depending on thickness) before applying the varnish. Shake the varnish before use. For a better result, shake the varnish the day before and let it sit in order to avoid the formation of air bubbles when applying. The varnish can also be mixed gently with a stick before use in order to prevent the formation of bubbles. Apply 1 to 3 light coats, instead of one single thick coat. A thick coat will take longer to dry, may run or sink in during application and may result in visible paint marks when dry. Lay the work to be varnished flat on a table. Do not dilute the varnish as it will then be more likely to produce air bubbles. Use : Can be mixed with acrylic colours to thin out the colour or to create glossy glazes. Supports : suitable for all supports. Drying time : 3 to 5 days with acrylic. Let dry for 3 hrs between each coat.

Medium Gloss - 473ml

Liquitex

$39.99

In stock Low stock Unavailable

All purpose glossy medium designed to enhance the intensity and depth of acrylic colours; increase transparency and gloss; ease flow of paint and add flexibility and adhesion of paint film.
-All purpose Liquitex medium, formulated to be mixed into all Liquitex acrylic paints and mediums
-Translucent when wet, transparent when dry
-Dries to a non-tacky, hard, flexible surface that is resistant to dirt retention
-Will not crack as surface expands and contracts during temperature and humidity changes
-Applicable for any surface (flexible and inflexible), including canvas, paper, wood, Plexiglas, and more.
-Not for use over oil paint.

Application ideas:

As an Extender:
-Mix with Liquitex Soft Body Artist Colours to extend volume and increase transparency, while maintaining paint viscosity.
-Mix with Liquitex Heavy Body Artist Colours to extend volume and increase transparency, while decreasing paint viscosity.

As a Fixative:
-Use as a fixative over artwork (acrylic paint, pastel, graphite, chalk, etc.) to increase gloss or shine. Mix 1 part Gloss Medium & Varnish to 1 part distilled water. Apply with an atomizer or airbush.

As a Binder / Adhesive:
-Powdered pigments or aggregates may be mixed into Liquitex Gloss Medium & Varnish, however they must be compatible with acrylics. This can be a cost effective way to make student grade soft body gloss paint.
-The archival properties of Liquitex Gloss Medium & Varnish make it ideal as a glue for collage materiels.

As a Ground:
-Use as a transparent ground for acrylic paint instead of gesso to allow substrate to be seen. To prevent substrate induced discoloration, wash cotton or linen canvas before use.

Lightweight Modeling Paste - 237ml

Liquitex

$24.99

In stock Low stock Unavailable

Liquitex light modeling paste is a light load coated with acrylic resin which allows for the creation of three-dimensional shapes. It is designed to be mixed with any acrylic colour, but may make it paler depending on the quantity added.

Of thick consistency and of matte and opaque rendering, Liquitex light modeling paste dries slowly and results in a very hard surface. It may be worked with an artist’s knife when wet, sanded, sculpted and painted once dry. It can be mixed with other textured gels and mediums to create a range of textures.
For sale in 8 oz/237 ml, 16 oz/475 ml and 32 oz/946 ml formats.
Supports : suitable for all rigid supports.
Important information :
Do not mix with oil.
Apparition of cracks if the application is on a flexible surface.
Test before use.
Use :
Thick textures for rigid supports.

Matte Medium - 473ml

Liquitex

$39.99

In stock Low stock Unavailable

Liquitex matte medium can be used to thin acrylic, increase its transparency and mattness, make it more fluid and soft and improve its adherence. Of medium viscosity, the medium accentuates the matte rendering of acrylic colours to which it is mixed. It can also be used as a background or a fixative. It is opaque when wet and translucent when dry. It delays drying time and is permanent, non-yellowing and resistant to water once dry. Liquitex matte medium is offered in 4 oz, 8 oz, 16 oz, 32 oz and 128 oz formats. Important information : Do not dilute by more than 25% with water. Do not use as a final varnish or as a glazing medium.

Gesso Clear - 946ml

Liquitex

$54.99

In stock Low stock Unavailable

Liquitex transparent gesso primes rigid supports while preserving their natural aspect. It provides a rough surface adapted to a large diversity of mediums and allows the work surface to show through.
Liquitex transparent gesso is particularly suitable for pastel or charcoal works, but also for oil, acrylic, gouache and casein. It allows for a better colour adherence and can be coloured.
Translucent once dry, it is permanent, does not crack, is non-yellowing, flexible and waterproof. This gesso is ideal for painting on coloured surfaces and constitutes an excellent background for oil and acrylic paintings.
Liquitex transparent gesso is offered in 4 oz/120 ml, 8 oz/250 ml, 16 oz/500 ml and 32 oz/1 l formats.
Drying time : at least 24 hrs before painting.
Supports : canvas, cardboard, paper, wood and other non-greasy surfaces.
Important information :
Do not mix with oil.
Is water soluble.

Soluvar Gloss Varnish Spray - 400Ml

Liquitex

$39.99

In stock Low stock Unavailable

Protect your oil or acrylic pieces with Liquitex Soluvar Spray Varnish. It adjusts and unifies surface sheen and dries clear to a flexible, non-sticky, hard surface. It also protects colours from UV light damage and resists discolouration caused by humidity and heat. A varnish with excellent levelling properties that will not hold brushmarks. Use it on flexible or rigid surfaces, indoors or outdoors. Glossy Soluvar Spray Varnish enhances the depth and intensity of colours, while Matt Soluvar Spray Varnish reduces their intensity, depth and shine.

Gesso Basics White- 1.39L

Liquitex

$39.99

In stock Low stock Unavailable

An opaque white gesso to create the ideal absorbency, stiffness and adhesion for paint application. Use it with acrylic and oil paints or mediums, chalk and oil pastels, graphite, pencil and charcoal. Suitable for raw canvas, hardboard, paper, wood and non-oily, porous supports.

Gesso Clear - 237ml

Liquitex

$24.99

In stock Low stock Unavailable

Liquitex transparent gesso primes rigid supports while preserving their natural aspect. It provides a rough surface adapted to a large diversity of mediums and allows the work surface to show through.
Liquitex transparent gesso is particularly suitable for pastel or charcoal works, but also for oil, acrylic, gouache and casein. It allows for a better colour adherence and can be coloured.
Translucent once dry, it is permanent, does not crack, is non-yellowing, flexible and waterproof. This gesso is ideal for painting on coloured surfaces and constitutes an excellent background for oil and acrylic paintings.
Liquitex transparent gesso is offered in 4 oz/120 ml, 8 oz/250 ml, 16 oz/500 ml and 32 oz/1 l formats.
Drying time : at least 24 hrs before painting.
Supports : canvas, cardboard, paper, wood and other non-greasy surfaces.
Important information :
Do not mix with oil.
Is water soluble.

Medium Gloss - 1.39L

Liquitex

$84.99

In stock Low stock Unavailable

All purpose glossy medium designed to enhance the intensity and depth of acrylic colours; increase transparency and gloss; ease flow of paint and add flexibility and adhesion of paint film.
-All purpose Liquitex medium, formulated to be mixed into all Liquitex acrylic paints and mediums
-Translucent when wet, transparent when dry
-Dries to a non-tacky, hard, flexible surface that is resistant to dirt retention
-Will not crack as surface expands and contracts during temperature and humidity changes
-Applicable for any surface (flexible and inflexible), including canvas, paper, wood, Plexiglas, and more.
-Not for use over oil paint.

Application ideas:

As an Extender:
-Mix with Liquitex Soft Body Artist Colours to extend volume and increase transparency, while maintaining paint viscosity.
-Mix with Liquitex Heavy Body Artist Colours to extend volume and increase transparency, while decreasing paint viscosity.

As a Fixative:
-Use as a fixative over artwork (acrylic paint, pastel, graphite, chalk, etc.) to increase gloss or shine. Mix 1 part Gloss Medium & Varnish to 1 part distilled water. Apply with an atomizer or airbush.

As a Binder / Adhesive:
-Powdered pigments or aggregates may be mixed into Liquitex Gloss Medium & Varnish, however they must be compatible with acrylics. This can be a cost effective way to make student grade soft body gloss paint.
-The archival properties of Liquitex Gloss Medium & Varnish make it ideal as a glue for collage materiels.

As a Ground:
-Use as a transparent ground for acrylic paint instead of gesso to allow substrate to be seen. To prevent substrate induced discoloration, wash cotton or linen canvas before use.

Gloss Varnish - 237ml

Liquitex

$26.99

In stock Low stock Unavailable

Seal your acrylic works with a transparent, gloss acrylic layer which is breathable, permanent and protects against UV damage. Offering excellent levelling properties, Liquitex Gloss Varnish dries clear to a flexible, non-tacky, hard surface that will not hold brush marks. Designed for interior and exterior use, it is suitable for flexible and rigid supports. Use with acrylic paints and mediums on all acrylic surfaces. Specifications: 100% acrylic polymer varnish, lightfast and archival, permanent, non-yellowing, flexible and non-cracking, water-resistant when dry, intermixable with all Liquitex materials.

Satin Varnish - 237ml

Liquitex

$26.99

In stock Low stock Unavailable

Liquitex Satin Varnish dries clear to a flexible, non-tacky, hard surface that will not hold brush marks. Offering excellent levelling properties, it is permanent and protects against UV damage. Suitable for acrylic paints and mediums, as well as both flexible and rigid surfaces.

Specifications:

interior and exterior use
100% acrylic polymer varnish
adjusts and unifies surface sheen
protects and resists dirt retention
increases brightness and colour saturation
resists discolouration
semi-opaque when wet
transparent when dry

Lightweight Modeling Paste - 473ml

Liquitex

$39.99

In stock Low stock Unavailable

Liquitex light modeling paste is a light load coated with acrylic resin which allows for the creation of three-dimensional shapes. It is designed to be mixed with any acrylic colour, but may make it paler depending on the quantity added.

Of thick consistency and of matte and opaque rendering, Liquitex light modeling paste dries slowly and results in a very hard surface. It may be worked with an artist’s knife when wet, sanded, sculpted and painted once dry. It can be mixed with other textured gels and mediums to create a range of textures.
For sale in 8 oz/237 ml, 16 oz/475 ml and 32 oz/946 ml formats.
Supports : suitable for all rigid supports.
Important information :
Do not mix with oil.
Apparition of cracks if the application is on a flexible surface.
Test before use.
Use :
Thick textures for rigid supports.

Slow-Dry Fluid Retarder - 118ml

Liquitex

$16.99

In stock Low stock Unavailable

Liquitex Slow-Dri Fluid Retarder slows drying time by 40%, without affecting colour opacity. It allows artists to work their paint for longer.

Glazing Medium - 237ml

Liquitex

$24.99

In stock Low stock Unavailable

Liquitex glazing medium is used for maximum transparency, luminosity, and depth.

It thins the colour, makes it easier to apply, and dries quickly. The best results are obtained with transparent acrylic paints. Transparency varies by pigment.

Not suitable for use with oil paints.
Do not dilute with water.

Modeling Paste - 3.78L

Liquitex

$149.99

In stock Low stock Unavailable

Liquitex modeling paste is a marble powder coated with acrylic resin, which allows for the creation of three- dimensional shapes and is designed to be mixed to any acrylic colour.

Of viscous consistency and of matte and opaque rendering, Liquitex modeling paste dries quickly and results in a very hard surface. It can be worked with an artist’s knife when wet, sanded, sculpted and painted once dry.

Offered in 8 oz/237 ml, 16 oz/473 ml, 32 oz/946 ml and 1 gallon formats.
Supports : suitable for all rigid supports.

Important information :
Do not mix with oil.
Apparition of cracks if applied on a flexible surface.
Test before using.

Use :
Thick textures on rigid supports.

Flexible Modeling Paste - 946ml

Liquitex

$54.99

In stock Low stock Unavailable

An acrylic and marble putty to build textures on semi-flexible supports and create 3D shapes. It dries to a very hard yet flexible opaque, white, matte finish, on supports that may be subject to some movement. Can be used on its own, mixed with colour or painted once dry.

Gesso Clear - 1.39L

Liquitex

$79.99

In stock Low stock Unavailable

Liquitex transparent gesso primes rigid supports while preserving their natural aspect. It provides a rough surface adapted to a large diversity of mediums and allows the work surface to show through.
Liquitex transparent gesso is particularly suitable for pastel or charcoal works, but also for oil, acrylic, gouache and casein. It allows for a better colour adherence and can be coloured.
Translucent once dry, it is permanent, does not crack, is non-yellowing, flexible and waterproof. This gesso is ideal for painting on coloured surfaces and constitutes an excellent background for oil and acrylic paintings.
Liquitex transparent gesso is offered in 4 oz/120 ml, 8 oz/250 ml, 16 oz/500 ml and 32 oz/1 l formats.
Drying time : at least 24 hrs before painting.
Supports : canvas, cardboard, paper, wood and other non-greasy surfaces.
Important information :
Do not mix with oil.
Is water soluble.

Matte Varnish - 946ml

Liquitex

$64.99

In stock Low stock Unavailable

This 100% acrylic polymer varnish protects acrylic colour from harsh elements. Dries to a clear, non-tacky, hard, flexible surface that is resistant dirt retention and water when dry. Of fluid viscosity, Liquitex varnish becomes transparent upon drying, stays smooth and does not yellow.

100% acrylic polymer varnish
Water soluble when wet
Good chemical and water resistance when dry
Non-tacky
Hard, yet flexible surface
Resistant to dirt retention
Resists discolouring due to humidity, heat and ultraviolet light (non-yellowing, non-fogging)
Depending upon substrate, allows moisture to pass through (breathable)
Not for use over oil paint
Protects acrylic colour
Archival
For interior and exterior use

Application

Apply as a final varnish over dry acrylic paint.
Varnish surface and environment must be clean, dry and dust free.
Acrylic paintings must be completely dried and cured for 48-72 hours before varnishing. Thicker acrylic applications may take more time to cure.
Application may be done by brush or spray. Generally a sprayed application will be thinner, smoother and more even. Rolling or sponging application is not recommended.

Caution: Acrylic paints and mediums become increasingly brittle in cold weather. Do not apply below 60°F.

Tips & Techniques

Use a wide, soft hair brush. Generally, a 1 to 4 inch flat brush is used, depending on the surface area.
Apply Liquitex varnish in 1-3 thin coats, rather than 1 thick coat. A thick coat will take longer to dry, may dry cloudy, may drip or sag during application and has a greater chance of showing brush strokes when dry.
When applying Liquitex Matte Varnish, apply no more than 1-2 thin coats. A thick application may result in cloudiness when dry. If more than 2 coats are desired, first varnish with gloss varnish until desired thickness is achieved and then apply a final coat of matte varnish.
Canvas should be placed horizontally in order to prevent the varnish from running. After varnishing, the surface should be shielded with a protective "tent". This will prevent any dust or airborne particles from settling into varnish as it dries.
Apply Liquitex varnish in slightly overlapping pattern that covers entire artwork. Apply in horizontal and vertical brush strokes, so that entire area is evenly coated.
Do not rework areas you might miss as the brush could pick up partially dried varnish and cause clouding. If areas are missed, wait until the varnish is dry and apply another coat.

Spray Application: Use for textured surfaces (thick impasto, thick textures), where brush application may result in foaming and fragile surfaces (watercolor, tempera, graphite, pastel, gouache), where brush application may disrupt drawing or painted surface.

Thinning: Do not thin, as it will weaken the varnish film and adhesion.

Removal: Not removable. Do not attempt to remove these varnishes with harsh solvents.

Tool care: Clean with soapy water while varnish is still wet.

Pouring Medium Gloss - 473ml

Liquitex

$39.99

In stock Low stock Unavailable

Liquitex Pouring Medium can be used in combination with soft body acrylic colours to create seamless surfaces and puddles of colour. Liquitex Pouring Medium is formulated to create a smooth, seamless, and strong body of paint when poured or dripped onto a surface. Suspend colours in Liquitex Pouring Medium for sculptural effects and surface treatments. This medium is permanent, non-yellowing and waterproof once dry. Added to fluid acrylic colours, it promotes drying and allows for a homogenous smooth coloured film. Specifications: anti-cracking and anti-bubbles, high-gloss, wet look when dry, keeps colours opaque, flexible, non-yellowing and water-resistant when dry, do not mix with oil paints

Gesso White - 3.78L

Liquitex

$149.99

In stock Low stock Unavailable

Premium acrylic gesso used to prepare painting surfaces for acrylic and oil paint.

Texture: Fluid
Sheen: Matte
Relative Opacity: Opaque

Non-yellowing
Flexible and non-cracking
Provides the perfect 'tooth' and adhesion to a wide variety of surfaces such as canvas, paper and wood
Excellent base coat primer for many applications, such as canvases, murals, etc.
One coat is usually all that is required.

Application :
Use undiluted or thin up to 25% with water. When thinning more that 25%, use an equal mixture of water and Liquitex Matte Medium to thin gesso. Tint with up to 10% Liquitex Soft Body or Heavy Body Artist Colours.

Matte Medium - 237ml

Liquitex

$24.99

In stock Low stock Unavailable

Liquitex matte medium can be used to thin acrylic, increase its transparency and mattness, make it more fluid and soft and improve its adherence. Of medium viscosity, the medium accentuates the matte rendering of acrylic colours to which it is mixed. It can also be used as a background or a fixative. It is opaque when wet and translucent when dry. It delays drying time and is permanent, non-yellowing and resistant to water once dry. Liquitex matte medium is offered in 4 oz, 8 oz, 16 oz, 32 oz and 128 oz formats. Important information : Do not dilute by more than 25% with water. Do not use as a final varnish or as a glazing medium.

Medium Gel Heavy Gloss - 473ml

Liquitex

$39.99

In stock Low stock Unavailable

Use Liquitex Gloss Heavy Gel to increase gloss, extend volume and thicken paint, while extending open time, or use it as a collaging adhesive. Suitable for acrylic paints and mediums, it can be used on all acrylic-friendly surfaces. Use it for a variety of techniques: painting, impasto, glazing when used with transparent colours, photo transfers, blending and softening edges, collaging, decoupage and mixed media.

Features:

increases viscosity to create an oil paint-like consistency that holds knife and brush marks
increases surface gloss, colour depth and transparency
extends your colour further without affecting acrylic stability
slows drying time
maintains paint adhesion, durability and archival quality

Instructions for use:

fully intermixable with all Liquitex products
can be thinned by diluting with up to 25% water (distilled water will give best results)
mix as much as you like into acrylic colour to increase viscosity and transparency (the more you add, the more transparent your colour will become)
semi-opaque when wet, transparent when dry (when used very thickly it may dry semi-opaque)
apply with a brush as a collaging glue and fixative

Caution:

do not vigorously over-brush as this can result in a foggy, hazy look when dry
do not use with any non-acrylic compatible media

Gloss Varnish - 946ml

Liquitex

$64.99

In stock Low stock Unavailable

Seal your acrylic works with a transparent, gloss acrylic layer which is breathable, permanent and protects against UV damage. Offering excellent levelling properties, Liquitex Gloss Varnish dries clear to a flexible, non-tacky, hard surface that will not hold brush marks. Designed for interior and exterior use, it is suitable for flexible and rigid supports. Use with acrylic paints and mediums on all acrylic surfaces. Specifications: 100% acrylic polymer varnish, lightfast and archival, permanent, non-yellowing, flexible and non-cracking, water-resistant when dry, intermixable with all Liquitex materials.

Matte Varnish - 473ml

Liquitex

$44.99

In stock Low stock Unavailable

This 100% acrylic polymer varnish protects acrylic colour from harsh elements. Dries to a clear, non-tacky, hard, flexible surface that is resistant dirt retention and water when dry. Of fluid viscosity, Liquitex varnish becomes transparent upon drying, stays smooth and does not yellow.

100% acrylic polymer varnish
Water soluble when wet
Good chemical and water resistance when dry
Non-tacky
Hard, yet flexible surface
Resistant to dirt retention
Resists discolouring due to humidity, heat and ultraviolet light (non-yellowing, non-fogging)
Depending upon substrate, allows moisture to pass through (breathable)
Not for use over oil paint
Protects acrylic colour
Archival
For interior and exterior use

Application

Apply as a final varnish over dry acrylic paint.
Varnish surface and environment must be clean, dry and dust free.
Acrylic paintings must be completely dried and cured for 48-72 hours before varnishing. Thicker acrylic applications may take more time to cure.
Application may be done by brush or spray. Generally a sprayed application will be thinner, smoother and more even. Rolling or sponging application is not recommended.

Caution: Acrylic paints and mediums become increasingly brittle in cold weather. Do not apply below 60°F.

Tips & Techniques

Use a wide, soft hair brush. Generally, a 1 to 4 inch flat brush is used, depending on the surface area.
Apply Liquitex varnish in 1-3 thin coats, rather than 1 thick coat. A thick coat will take longer to dry, may dry cloudy, may drip or sag during application and has a greater chance of showing brush strokes when dry.
When applying Liquitex Matte Varnish, apply no more than 1-2 thin coats. A thick application may result in cloudiness when dry. If more than 2 coats are desired, first varnish with gloss varnish until desired thickness is achieved and then apply a final coat of matte varnish.
Canvas should be placed horizontally in order to prevent the varnish from running. After varnishing, the surface should be shielded with a protective "tent". This will prevent any dust or airborne particles from settling into varnish as it dries.
Apply Liquitex varnish in slightly overlapping pattern that covers entire artwork. Apply in horizontal and vertical brush strokes, so that entire area is evenly coated.
Do not rework areas you might miss as the brush could pick up partially dried varnish and cause clouding. If areas are missed, wait until the varnish is dry and apply another coat.

Spray Application: Use for textured surfaces (thick impasto, thick textures), where brush application may result in foaming and fragile surfaces (watercolor, tempera, graphite, pastel, gouache), where brush application may disrupt drawing or painted surface.

Thinning: Do not thin, as it will weaken the varnish film and adhesion.

Removal: Not removable. Do not attempt to remove these varnishes with harsh solvents.

Tool care: Clean with soapy water while varnish is still wet.

Slow-Dry Medium - 118ml

Liquitex

$16.99

In stock Low stock Unavailable

Liquitex slow drying medium increases the drying time of acrylic paints by more than 30 %, making the mixing easier and increasing the transparency.

Important information :
Wait 5 days before varnishing.
Do not add more than 40% to the paint.
Do not mix with oil.
Care : soap and water.

Flexible Modeling Paste - 3.78L

Liquitex

$149.99

In stock Low stock Unavailable

An acrylic and marble putty to build textures on semi-flexible supports and create 3D shapes. It dries to a very hard yet flexible opaque, white, matte finish, on supports that may be subject to some movement. Can be used on its own, mixed with colour or painted once dry.

Natural Sand Texture Gel - 237ml

Liquitex

$24.99

In stock Low stock Unavailable

Natural sand particles add structure and texture to this 100% acrylic polymer gel. Highly flexible and adhesive, it dries to a glossy, beach sand finish. It will not chip or crack on canvas. Can be used on its own, mixed with colour or overpainted once dry. Apply thickly to create bold 3D effects, or finely to give surface texture.

Medium Gel Matte - 1.39L

Liquitex

$84.99

In stock Low stock Unavailable

Liquitex gel allows for matte rendering of colours without modifying their viscosity. This medium increases the volume of acrylic paints.
Liquitex gel must be added to acrylic colours and retains brushstrokes. It delays the lapping time and dries more quickly than the liquid medium. It is slightly translucent after drying.

Supports : suitable for all supports.
Uses :
As a binder for making economical paint from powdered pigments.
As canvas preparation.
To extend the mix of colours.
Important information :
Do not dilute by more than 25% with water.
Added to paint at a level in excess of 50%, it can lighten colours.
Do not mix with oil.

Medium Gel Extra Heavy Gloss - 237ml

Liquitex

$24.99

In stock Low stock Unavailable

Liquitex gel for acrylic colours serves to increase the volume of acrylic colours while increasing their transparency and depth.

Liquitex gel for acrylic colours lengthens drying time and increases lapping time. It can be used to create impastos and three-dimensional effects, and can be mixed with acrylic paints in order to vary their texture and luminosity. Of smooth consistency, it retains brushstroke marks.

Uses :

Thick glazes and glossy impastos.

Binder for pigments, sand, sawdust, stone, etc.

Important information :

Do not dilute by more than 25% with water.

Do not mix with oil.

Lightweight Modeling Paste - 946ml

Liquitex

$54.99

In stock Low stock Unavailable

Liquitex light modeling paste is a light load coated with acrylic resin which allows for the creation of three-dimensional shapes. It is designed to be mixed with any acrylic colour, but may make it paler depending on the quantity added.

Of thick consistency and of matte and opaque rendering, Liquitex light modeling paste dries slowly and results in a very hard surface. It may be worked with an artist’s knife when wet, sanded, sculpted and painted once dry. It can be mixed with other textured gels and mediums to create a range of textures.
For sale in 8 oz/237 ml, 16 oz/475 ml and 32 oz/946 ml formats.
Supports : suitable for all rigid supports.
Important information :
Do not mix with oil.
Apparition of cracks if the application is on a flexible surface.
Test before use.
Use :
Thick textures for rigid supports.

Ultra Gloss Varnish - 237ml

Liquitex

$26.99

In stock Low stock Unavailable

Liquitex high gloss varnish enhances the intensity, transparency and luminosity of colours. It protects and improves the fluidity of paint and its adherence to supports. Of medium viscosity, it becomes transparent upon drying, stays smooth and does not yellow. Important information : For interior and exterior use. The permanent varnishes are irreversible and must always be tested before being applied. The painted surface must be completely dry (between 72 hours and 2 weeks, depending on thickness) before applying the varnish. Shake the varnish before use. For a better result, shake the varnish the day before and let it sit in order to avoid the formation of air bubbles when applying. The varnish can also be mixed gently with a stick before use in order to prevent the formation of bubbles. Apply 1 to 3 light coats, instead of one single thick coat. A thick coat will take longer to dry, may run or sink in during application and may result in visible paint marks when dry. Lay the work to be varnished flat on a table. Do not dilute the varnish as it will then be more likely to produce air bubbles. Use : Can be mixed with acrylic colours to thin out the colour or to create glossy glazes. Supports : suitable for all supports. Drying time : 3 to 5 days with acrylic. Let dry for 3 hrs between each coat.

Satin Fluid Medium - 237ml

Liquitex

$24.99

In stock Low stock Unavailable

Liquitex Satin Fluid Medium can be used as a collaging adhesive, or to thin paint and extend volume with a satin finish. It increases colour depth and transparency and extends colour further without affecting acrylic stability. This medium also maintains paint adhesion, durability and archival quality. Ideal for use as a non-removable varnish to protect paintings and establish a satin surface sheen.

Characteristics:

Lightfast & archival
Permanent
Non-yellowing
Flexible & non-cracking
Water-resistant when dry
Intermixable with all Liquitex products

Specifications:

Contains 237 ml (8 oz)
Semi-opaque when wet, transparent when dry
Can be used with acrylic paints and mediums
Can be used on all acrylic-friendly surfaces
Can be thinned by diluting with up to 25% water
Recommended techniques: painting, collage and mixed media, photo transfers

Tips:

Do not shake or vigorously over-brush as this can result in a foggy, hazy look when dry
Do not use with any non-acrylic media

Gesso White - 1.39L

Liquitex

$79.99

In stock Low stock Unavailable

Premium acrylic gesso used to prepare painting surfaces for acrylic and oil paint.

Texture: Fluid
Sheen: Matte
Relative Opacity: Opaque

Non-yellowing
Flexible and non-cracking
Provides the perfect 'tooth' and adhesion to a wide variety of surfaces such as canvas, paper and wood
Excellent base coat primer for many applications, such as canvases, murals, etc.
One coat is usually all that is required.

Application :
Use undiluted or thin up to 25% with water. When thinning more that 25%, use an equal mixture of water and Liquitex Matte Medium to thin gesso. Tint with up to 10% Liquitex Soft Body or Heavy Body Artist Colours.

Modeling Paste - 1.89L

Liquitex

$84.99

In stock Low stock Unavailable

Liquitex modeling paste is a marble powder coated with acrylic resin, which allows for the creation of three- dimensional shapes and is designed to be mixed to any acrylic colour.

Of viscous consistency and of matte and opaque rendering, Liquitex modeling paste dries quickly and results in a very hard surface. It can be worked with an artist’s knife when wet, sanded, sculpted and painted once dry.

Offered in 8 oz/237 ml, 16 oz/473 ml, 32 oz/946 ml and 1 gallon formats.
Supports : suitable for all rigid supports.

Important information :
Do not mix with oil.
Apparition of cracks if applied on a flexible surface.
Test before using.

Use :
Thick textures on rigid supports.

Gesso White - 118ml

Liquitex

$16.99

In stock Low stock Unavailable

Premium acrylic gesso used to prepare painting surfaces for acrylic and oil paint.

Texture: Fluid
Sheen: Matte
Relative Opacity: Opaque

Non-yellowing
Flexible and non-cracking
Provides the perfect 'tooth' and adhesion to a wide variety of surfaces such as canvas, paper and wood
Excellent base coat primer for many applications, such as canvases, murals, etc.
One coat is usually all that is required.

Application :
Use undiluted or thin up to 25% with water. When thinning more that 25%, use an equal mixture of water and Liquitex Matte Medium to thin gesso. Tint with up to 10% Liquitex Soft Body or Heavy Body Artist Colours.

Medium Gloss - 237ml

Liquitex

$24.99

In stock Low stock Unavailable

All purpose glossy medium designed to enhance the intensity and depth of acrylic colours; increase transparency and gloss; ease flow of paint and add flexibility and adhesion of paint film.
-All purpose Liquitex medium, formulated to be mixed into all Liquitex acrylic paints and mediums
-Translucent when wet, transparent when dry
-Dries to a non-tacky, hard, flexible surface that is resistant to dirt retention
-Will not crack as surface expands and contracts during temperature and humidity changes
-Applicable for any surface (flexible and inflexible), including canvas, paper, wood, Plexiglas, and more.
-Not for use over oil paint.

Application ideas:

As an Extender:
-Mix with Liquitex Soft Body Artist Colours to extend volume and increase transparency, while maintaining paint viscosity.
-Mix with Liquitex Heavy Body Artist Colours to extend volume and increase transparency, while decreasing paint viscosity.

As a Fixative:
-Use as a fixative over artwork (acrylic paint, pastel, graphite, chalk, etc.) to increase gloss or shine. Mix 1 part Gloss Medium & Varnish to 1 part distilled water. Apply with an atomizer or airbush.

As a Binder / Adhesive:
-Powdered pigments or aggregates may be mixed into Liquitex Gloss Medium & Varnish, however they must be compatible with acrylics. This can be a cost effective way to make student grade soft body gloss paint.
-The archival properties of Liquitex Gloss Medium & Varnish make it ideal as a glue for collage materiels.

As a Ground:
-Use as a transparent ground for acrylic paint instead of gesso to allow substrate to be seen. To prevent substrate induced discoloration, wash cotton or linen canvas before use.

Medium Gel Heavy Gloss - 237ml

Liquitex

$24.99

In stock Low stock Unavailable

Use Liquitex Gloss Heavy Gel to increase gloss, extend volume and thicken paint, while extending open time, or use it as a collaging adhesive. Suitable for acrylic paints and mediums, it can be used on all acrylic-friendly surfaces. Use it for a variety of techniques: painting, impasto, glazing when used with transparent colours, photo transfers, blending and softening edges, collaging, decoupage and mixed media.

Features:

increases viscosity to create an oil paint-like consistency that holds knife and brush marks
increases surface gloss, colour depth and transparency
extends your colour further without affecting acrylic stability
slows drying time
maintains paint adhesion, durability and archival quality

Instructions for use:

fully intermixable with all Liquitex products
can be thinned by diluting with up to 25% water (distilled water will give best results)
mix as much as you like into acrylic colour to increase viscosity and transparency (the more you add, the more transparent your colour will become)
semi-opaque when wet, transparent when dry (when used very thickly it may dry semi-opaque)
apply with a brush as a collaging glue and fixative

Caution:

do not vigorously over-brush as this can result in a foggy, hazy look when dry
do not use with any non-acrylic compatible media

Gloss Varnish - 118ml

Liquitex

$16.99

In stock Low stock Unavailable

Seal your acrylic works with a transparent, gloss acrylic layer which is breathable, permanent and protects against UV damage. Offering excellent levelling properties, Liquitex Gloss Varnish dries clear to a flexible, non-tacky, hard surface that will not hold brush marks. Designed for interior and exterior use, it is suitable for flexible and rigid supports. Use with acrylic paints and mediums on all acrylic surfaces. Specifications: 100% acrylic polymer varnish, lightfast and archival, permanent, non-yellowing, flexible and non-cracking, water-resistant when dry, intermixable with all Liquitex materials.

Pouring Medium Matte - 473ml

Liquitex

$39.99

In stock Low stock Unavailable

Give your paint a matt finish, while thinning and extending its volume, or use as a collaging adhesive and fixative – Liquitex Matt Pouring Medium reduces surface gloss and increases colour depth and transparency. It lowers viscosity of heavier body paints, giving increased flow, and extends your colour further without affecting acrylic stability. Maintains paint adhesion, durability and archival quality. Suitable for painting, photo transfers, collaging and mixed media. Use with acrylic paints and mediums on all acrylic-friendly surfaces. Contains 473 ml.

Gesso White - 237ml

Liquitex

$24.99

In stock Low stock Unavailable

Premium acrylic gesso used to prepare painting surfaces for acrylic and oil paint.

Texture: Fluid
Sheen: Matte
Relative Opacity: Opaque

Non-yellowing
Flexible and non-cracking
Provides the perfect 'tooth' and adhesion to a wide variety of surfaces such as canvas, paper and wood
Excellent base coat primer for many applications, such as canvases, murals, etc.
One coat is usually all that is required.

Application :
Use undiluted or thin up to 25% with water. When thinning more that 25%, use an equal mixture of water and Liquitex Matte Medium to thin gesso. Tint with up to 10% Liquitex Soft Body or Heavy Body Artist Colours.

Liquitex offers one of the most extensive ranges of acrylic mediums and varnishes available, covering every stage of the painting process. Gesso in white, black, grey, clear and super heavy formulas prepares surfaces for optimal paint adhesion. Gloss, matte and satin mediums adjust sheen and consistency, while gel mediums in standard, heavy and extra heavy weights add body and texture. Pouring mediums in gloss, matte and iridescent formulas support fluid art techniques. Texture gels including modeling paste, crackle paste, string gel and glass bead gel open up three-dimensional and mixed media applications. Retarders and flow aids extend working time and improve blendability. Varnishes protect finished work in gloss, matte and satin finishes, available in brush-on and spray formats. Discover the full Liquitex range.

Your cart

Liquitex - Mediums & Varnishes